17 April 2013

Coolant Change

Please do the coolant change after the engine is totally COOL DOWN to avoid injuries.

Decided to change the coolant, with kangen water provided by Charlie.

Item to prepare: 
Water
New Coolant
12mm T Bolt nut


Locate the drain bolt for radiator, it is at the bottom of radiator, if you look from above, there is where it located:

Remove the radiator cap and drain the old coolant, and locate the bleed bolt at the top of thermostat housing.

Loosen it.


After the old coolant being drained. Screw the drain bolt back to its original position. and start filling in new coolant, and mix with water until there is water coming out from bleed bolt, tighten the bleed bolt and continue to fill the water until it is full. Close the radiator cap.

0 comments:

Blogger Templates by OurBlogTemplates.com 2007