My HID doesnt work normally, my right lamp is white but the left 1 is yellow, oh well, went back to Mech Lim.
His worker checked my ballast, and the problem came from it.
So Aron decide to take the HID kit out, and replace my bulb with some good 1.
Will test tonight. =X
__
It looks like white in the photo, but actually it is yellow. Will try to snap a pic with a better camera. =X
Leaking, more worse than leaking.....
This is taken right after Aron off my engine.
After came back from Shah Alam, 2 km left to my house, the engine oil light lite up, and Aron is like "wtf", it on and off, then remain lite up. We go back ASAP.
Off my engine, pop the hood, heard a sound that is something like evaporate....will check it tomorrow morning. Hope it caused by loosen nut due to horrible bumping journey with hard Tein.
_
Sent to Mech Keong on 15 May.
He examined and changed the switch.....donno what is the switch call...and the problem temporary solved. =X
Refill engine oil? nah, the previous fella fill in toooo much. It is at the sufficient level now.
After raised the height of the rear, every time i go over road bump, there is a "dok" sound coming from rear left area. After Mech Keong inspect, it should be coming from absorber.....
Well.....Aron "sien" already, everything just not in his plan..........
Temporary Solution:
Set both of the rear absorber to the hardest - 16. No problem so far.....and the braking power is improved.
Aron didnt sleep for the whole night, because of the suspension? or because he drink too much of chinese tea? huhu....
At 9am, he bring me go to Mechanic Keong's workshop to install the front adjustable that pass to him last week. I think the guy is experienced, he make another track for Aron when Aron is requesting 3''. He made another 2'' track.
1st round, try the 3'' track.
OMFG, Monsta Prelude!!! 9'' from the ground, 6 finger gap from tire to fender ! Aron forgot to take photo.....
2nd round, 2'' track.
Ok la....7'' from ground, 3 and half finger gap from tire to fender. But the spring compressed, so it hitting itself when going over uneven road at certain speed.....settled.
Next destination, Sunway.
At Blitz Garage, request to increase the height of the rear.
now both front and back facing the same problem. Spring compressed and hitting itself when going over uneven road. Have to tune it / find a way to settle.
___
Just now Aron came to me and adjust the soft/hard of the front suspension, found out that the adjustment knob of driver side' absorber is loose!!! Like turning a screw......he manage to turn with the click when he push it in, hope it works.
Temporary Solution:
Use a wrench size number 8, and firm the nut below the knob to prevent loosing, and turn the knob. it is working.